Project Category: Protective Products

Home   /   Project

About This Product

Disc Style Flange Protectors:

Each protector is cut to the OD of the flange of the consumers choosing and comes with 4 bolt holes drilled out. The finished product is typically fastened to the flange with clips and washers, cable ties or steel wire through the bolt holes.

Notable:

  • Can be made to any OD or Bolt Circle with very little lead time
  • Best option for flanges larger than 12”

Stocked in:

  • MDF (particle board / Masonite) – 1/8” thick
  • Proplex (corrugated plastic) – 1/8” thick
  • HDPE (plastic) – 1/8” thick
  • Plywood – 3/8” – ¾” thick

Push-in Flange Protectors:

  • The most versatile and universal flange protector on the market. Suitable for both imperial (ANSI) and metric (DIN) flanges to specifications DN 2627 – 2638, 150, BS 5504, API and ANSI B16.5. Its unique design allows the protection of an array of different size flanges, as well as other various classifications of flanges with one part.

Molded Flange Protectors:

  • Molded flange protectors are a quick fitting solution. Simply insert the plugs into the bolt holes. They will not tear or crack and are weather and petroleum resistant. Suitable for ANSI, API, ASA and BS1560 flanges.
Ansi Pipe Size ANSI Class API Size API Class
1/2″ 150#, 300/600#
3/4″ 150#, 300/600#
1″ 150#, 300/600#
1-1/4″ 150#, 300/600#
1-1/2″ 150#, 300/600#
2″ 150#,300/600#, 900/1500# 2-1/16″ 2000#, 3000/5000#
2-1/2″ 150#,300/600#,
3″ 150#,300/600#, 900#,1500# 3-1/8″ 2000#, 3000#,5000#
4″ 150#, 300#,600#, 900#, 1500# 4-1/16″ 2000#, 3000#,5000#
6″ 150#, 300#,600#, 900#, 1500# 7-1/16″ 2000#, 3000#,5000#
8″ 150#, 300#, 600# 9″ 2000#
10″ 150#, 300#, 600# 11″ 2000#
12″ 150#, 300#, 600# 13-5/8″ 2000#

About This Product

Plastic Pipe Caps :

  • Provides cost effective bevel protection and seals out contaminants for shipping and storage
  • Easy to install
  • Available from stock in 1/4” – 60” diameter

Vinyl Pipe Caps :

  • Like Plastic Pipe Caps, Vinyl Caps go over the ends of pipe or fittings to protect the bevel or thread. The elasticity of the vinyl material provides them with an airtight seal while still maintaining the ease of installment.

Tapered Caps and Plugs:

  • The tapered designed provides a tight fit for any size pipe or tube. This design allows them to be used as both caps and plugs. This product is available in incremental diameters from 3mm – 336mm (0.118” – 13.35”).

BC Series:

  • Bottle Caps (BC Series) are caps designed to protect SCBA bottle valve threads during transit or storage. A large knobbed head makes the application or removal of this cap effortless.

Square Head Threaded Plugs:

  • Square Head (TPN Series) are threaded plugs designed to fit NPT threads. Made with High-Density Polyethene, these plugs are a formidable option to protect internal threading while simultaneously preventing contamination from entering the fitting.

Flexi-Plugs:

  • Flexi-Plugs have a unique ribbed design that affords each size the ability to friction fit into a range of different inside dimensions based on wall thicknesses of the provided application. These plugs can be purchased in sizes 1/2” – 10”. Flexi-Plugs are best used to efficiently plug already racked or bundled pipe with a variety of different ID’s per size.

About This Product

THREAD PROTECTORS

  • The most economical way of protecting threads from environmental corrosion and point to point handling.
  • Polyethylene construction makes this protector the most commonly used in the Petroleum Industry.
  • Available in light weight, heavy weight and pressed steel
  • Custom thread protectors available – please inquire

Typical Stock Items

  •  2-3/8″ – 4-1/2″ EUE Closed End Pin and Box
  •  2-3/8″ – 4-1/2″ EUE Open End Pin
  • 2-3/8″- 4-1/2″ API IF Pin and Box
  • 4-1/2″ – 13-3/8″ STC/LTC Pin and Box
  • 4-1/2” – 9-5/8” Buttress Pin and Box
  • 2-3/8″ – 9-5/8″ API Reg Pin and Box
  • 2-7/8″ – 7-5/8″ API H90 Pin and Box
  • 2-7/8″ API PAC Pin and Box
  • 3-1/2″ – 4-1/2″ API FH Pin and Box
  • 3-1/2″ – 5″ API XH Pin and Box
  •  6-5/8″  API LH Pin and Box
  • 3/4″-7/8″ and 1″ Sucker Rod Caps and Plug
  • 2 -3/8″ SL H90 HT Pin and Box
  • DS38 and DS40 Pin

Also Available

  • VAM, New VAM
  • NK3SB
  • Hammer Unions (ACME)

About This Product

Plastic Sleeve Netting

  • Ideal for protecting precision machined surfaces
  • Local inventory available in ½” – 9” diameter
  • All sizes available by the roll or by the foot – please inquire

Part # Size Range Large Roll Qty (ft) Small Roll Qty (ft)
SW-03 1/4 to 3/8 3500 700
SW-04 3/8 to 3/4 300 600
SW-05 1/2 to 1 2750 550
SW-10 1 to 1 1/2 1700 340
SW-15 1 1/2 to 2 900 180
SW-20 2 to 2 1/2 800 160
SW-200-22 2 to 4 800 160
SW-25 2 1/2 to 3 600 120
SW-30 3 to 4 450 90
SW-40 4 to 5 350 70
SW-50 5 to 6 250 50
SW-64 6 1/4 to 7 1/2 250 50
SW-75 7-1/2 to 9 200 40
SW-90 9 to 10 200 40

 

About This Product

Sucker Rod Caps:
Sucker Rod Caps are Low Density Polyethylene caps used to protect the pin end of a steel rod during times of storage or transportation.

Stocked in a size range of 5/8” to 1-1/8”

Sucker Rod Plugs:

Sucker Rod Plugs are Polyethylene plugs used to protect coupling ends of rod from internal damage during times of transportation or storage.

Stocked in a size range of 5/8” to 1-1/8”

About This Product

Spray Shields are used as a mitigation application where the primary focus is to prevent harmful spray outs or leaks from conjoining flanges or pipe. Made from Vinyl or Teflon, these protectors are similar to a bag designed specially for flange and pipe joints and easily applied with a simple tie of a lace.
Offered in:
“Indicating” – spray shield will change color when experiencing a spray out or leak
“Non-Indicating” – indication of a spray out or leak is unnecessary

Recent Comments

    Archives

    Categories

    • No categories

    Meta